BREMBO Prime 09.B085.13 Jarrulevy ABARTH 500 / 595 / 695 305x28mm, 4, rei'itetty/tuuletettu sisältä, kaksiosainen jarrulevy, Alumiininen jarrulevykammio

BREMBO Prime Brake Disc 09.B085.13 – High-performance perforated/vented two-part disc for ABARTH 500, 595 and 695

The BREMBO Prime Brake Disc 09.B085.13 represents the pinnacle of Italian brake engineering excellence – designed for enthusiasts who demand maximum performance, precision and style. Manufactured by BREMBO, the world's leading brake system specialist, this high-performance perforated/vented brake disc delivers exceptional braking force and superior heat dissipation under the most demanding driving conditions. Technical specifications include an outer diameter of 305.0 mm, a disc thickness of 28.0 mm and innovative two-part construction with an aluminium brake disc hub.

The 09.B085.13 BREMBO Prime brake disc features a perforated/vented design with 4 mounting holes and advanced cooling technology. The two-part brake disc construction combines a cast iron friction ring with a lightweight aluminium brake disc hub, reducing unsprung weight while maintaining superior thermal management. Made of premium cast iron with precision-drilled cooling holes, it comes with corrosion-resistant coating. The brake disc meets all international safety standards and is designed specifically for high-performance applications.

Which vehicles are compatible with the BREMBO 09.B085.13?

For which ABARTH models is the BREMBO Prime 09.B085.13 brake disc suitable?

This brake disc is compatible with the following Abarth models: 500 (2008–present), 500C (2010–present), 595 (2008–present), 595C (2010–present), 695 (2008–present) and 695C (2010–present). The BREMBO Prime brake disc is specifically engineered for these high-performance variants of the FIAT 500 platform.

Installation instructions for BREMBO Prime 09.B085.13

1. Replace brake discs in pairs to ensure balanced braking performance and optimal weight distribution.

2. Remove the wheels and carefully detach the brake caliper. Support the caliper securely to prevent stress on the brake lines.

3. Remove the old disc: carefully loosen the retaining bolts. For seized components, apply penetrating oil and allow time to work before gentle tapping.

4. Thoroughly clean the hub surface and inspect the aluminium brake disc hub mounting points for any damage or corrosion.

5. Install the new two-part brake disc, ensuring proper alignment of the aluminium hub with the friction ring, then install new brake pads and tighten all bolts to specification.

6. After installation, pump the brake pedal several times to seat the pads and check brake fluid level in the reservoir.

7. Bedding-in: perform 8–12 progressive braking cycles from 80 to 30 km/h to properly condition the perforated surface and establish optimal pad-to-disc contact.

FAQ: BREMBO Prime Brake Disc 09.B085.13

Is the BREMBO Prime 09.B085.13 suitable for track use with ABARTH 500 models?

Yes, this perforated/vented brake disc with aluminium brake disc hub is specifically designed for high-performance applications including track use. The two-part construction and advanced cooling design make it ideal for the demanding conditions of ABARTH 500, 595, and 695 models on track.

Can the BREMBO 09.B085.13 be used with the ABARTH 500C Convertible?

Absolutely, the BREMBO Prime brake disc 09.B085.13 is compatible with the ABARTH 500C Convertible. The 305x28mm dimensions and 4-bolt pattern match the convertible's brake system requirements perfectly.

What are the benefits of the aluminium brake disc hub in the ABARTH 695?

The aluminium brake disc hub significantly reduces unsprung weight in the ABARTH 695, improving handling response and acceleration while maintaining the structural integrity needed for high-performance braking applications.

Do the brake pads need to be replaced at the same time as the BREMBO brake disc 09.B085.13?

Yes, it is highly recommended to replace brake pads together with new BREMBO Prime brake discs. This ensures optimal surface contact between the pads and the perforated disc surface for maximum braking efficiency.

Is the BREMBO brake disc 09.B085.13 ventilated or solid?

This brake disc is perforated/vented with advanced internal cooling channels. The perforations and venting system provide superior heat dissipation compared to solid discs, preventing brake fade during intensive use.

How should new brake discs be properly bedded in?

During the first 300 km, perform progressive braking cycles and avoid emergency stops. The perforated surface requires proper bedding-in to develop an optimal friction layer that maximizes the performance benefits of the two-part design.

What is the outer diameter and thickness of this brake disc?

The outer diameter is 305 mm with a thickness of 28 mm – specifically engineered for high-performance compact vehicles requiring superior stopping power and heat management.

Is this brake disc suitable for vehicles with ABS?

Yes, the BREMBO Prime 09.B085.13 is mainly compatible with ABS-equipped vehicles. The perforated/vented design works seamlessly with modern electronic braking systems without affecting ABS functionality.

Do I need special tools to install the BREMBO brake disc 09.B085.13?

Standard brake service tools are sufficient for installation. However, due to the two-part brake disc construction with aluminium brake disc hub, careful attention to torque specifications is essential to ensure proper assembly of both components.

What are the advantages of the BREMBO brake disc 09.B085.13 compared to other models?

The Prime 09.B085.13 offers superior heat dissipation through its perforated/vented design, reduced weight via the aluminium brake disc hub, and enhanced durability with the two-part construction – making it ideal for high-performance driving applications.